Your water heater is one that is used and higher priced appliances in your home, and consumes a large associated with your energy dollars each month. And experts say regular care and maintenance is essential to protecting your investment and saving at your home heating as well as costs.
Regular flushing of one’s water heater is considered the single most important step you can take to prolong its service life additionally, you will save energy. A duration of time, sediments mount up in the bottom of your water heater. These sediments act as a barrier between the flame and the tank, thereby making your heater burn longer and hotter. This is not only destructive to the tank, but highly inefficient and will significantly raise your heating costs.
In most regions of the country, the normal water heater lasts 3-5 years. Regularly flushing your water heater can double the life of your water heater from 3-5 to 7-10 years. Device costs of replacement running from $700 to over $1200 in some cases, getting the most out of your heater is critical in today’s economic condition. In addition, regular flushing makes your water heater run more efficiently and can cut heating costs fifty percent. Depending on the volume of drinking water your home uses, that can mean a savings of $20 to over $50 a week.
To drain your water heater, first you should set the thermostat to pilot (if it is really a gas water heater) or turn the circuit breaker off (if it is definitely an electric heater). Failure to do so could result in overheating and severe damage to the water heater. Next, close the water supply valve located more than a water inlet line going into your water heater. Equipped to connect a garden hose to the drain valve located towards the bottom of the heater. Open the drain and allow it to run until all of your water has emptied from the unit. Then close the drain. Open the water supply valve and refill the central heater. You should also open a hot water faucet somewhere inside and stand there and watch it run for several minutes until the flows out perfectly. This will allow air to vent off of the heater and the hot water lines. Finally, you can turn the thermostat to be able to its regular setting (for a gas heater), or turn the circuit breakers back on (for an electric heater).
Besides regularly flushing your water heater, plumbing experts also advise adding a water treatment system to your dwelling to filter or condition the water so may be less corrosive to your plumbing system, particularly in areas which have hard hot water. For more ways to care for and protect your home plumbing system, contact a licensed, professional plumbing contractor in place to discuss options and merchandise to work for you.
Abacus Plumbing, Air Conditioning & Electrical
The Woodlands, TX
(281) 528-1610